Функциональный генератор TTI, TGP110

Функциональный генератор TTI, TGP110 Aim-TTi TGP110 Pulse Generator The TGP110 is a dedicated pulse generator that operates in a quite different way from a function generator. It can generate pulses of a set width regardless of the repetition rate offering duty cycles which can extend down to 1 in 100 million. In addition to continuous operation, single or multiple pulses can be generated in response to trigger or gating signals with precisely defined timing relationships using the delay facility. 0.1Hz to 10MHz frequency range 50ns to 5s pulse width, independent of period Fully variable pulse delay, 50ns to 5s Square wave, double pulse and delayed pulses Free-run, gated and triggered modes Output variable 0.1V to 10V from 50Ω Complement switch, TTL and sync outputs Period Delayed Pulse Range 100nsec to 10sec (10MHz to 0.1Hz) A pulse is generated after a delay set by the delay controls; the delay is related to rising edge of the trigger signal Jitter <0.1% Gate/Trig Input Pulse Width Frequency Range dc - 10MHz Range 50nsec to 5sec Signal Range TTL threshold; max. input ±10V Jitter <0.1% Min. Pulse Width >30nsec Delay 50Ω Output Range 50nsec to 5sec (plus trigger propagation) Amplitude Two switch selectable range of 0.1V-1.0V and 1V-10V from 50Ω (50mV to 500mV and 500mV to 5V into 50Ω). Adjustable within range by vernier Run Rise/Fall Times Typically 10nsec into 50Ω load Normal operational mode in which pulses are generated continuously at 0.1Hz to 10MHz. Aux Output Triggered Duplicates 50Ω output but at a fixed CMOS/TTL level Dc to 10MHz pulse train in synchronism with external trigger pulses; pulse width determined by pulse width controls. Trigger can be generated manually from front panel button Sync Output Gated Amplitude A positive going pulse at CMOS/TTL level 0.1Hz to 10MHz pulse train, parameters set by period and pulse width controls, starts synchronously with leading edge of gate input. Last pulse is completed at the end of gating period. Gating signal can be generated manually from front panel button Timing Leading edge starts >20nsec before the TTL/50Ω output transition Normal Pulse Duration Typically 30nsec One pulse is generated each period. The delay setting is ignored Complement Switch Square Wave Inverts the AUX and 50Ω outputs 0.1Hz to 10MHz square wave, frequency set by the period controls. Pulse width and delay settings ignored. Mark: Space ratio: 1:1±10% General Double Pulse Power 230V or 115V AC nominal 50/60Hz, adjustable internally A second pulse is generated after a delay set by the delay controls; the delay is related to the leading edge of the first pulse Safety Complies with EN61010-1

Информация

Код товара SKU_18528

Производитель Thurlby Thandar Instruments

Артикул производителя TGP110

Условия поставки Под заказ

Цена : Цену уточняйте: radioniсs@mail.ru

Оформить заказ можно здесь:

Заказать

Добавить в корзину

Функциональный генератор TTI, TGP110

Контакты

Ваша корзина

Вход для клиентов

Информация